CleenBeez Logo

CleenBeez

Back to Blog
Should You Rinse Dishes Before the Dishwasher? What Dishwasher and Detergent Makers Say

Should You Rinse Dishes Before the Dishwasher? What Dishwasher and Detergent Makers Say

By CleenBeez Team

Kitchen

CleenBeez may earn a commission if you buy through links on this page. We pick products based on facts shown on brand labels, manufacturer documents, and product pages, not paid placement. This article is cleaning education, not appliance repair advice. Always follow your own dishwasher manual.

Rinsing plates before they go in the dishwasher feels responsible. The companies that build dishwashers and make detergent mostly say it is wasted effort. Their guidance is consistent: scrape, don't rinse. A viral thread goes further and says pre-rinsing is the reason dishes come out less clean. We read the makers' own pages, and that stronger claim is not something we found them publish or test.

The line worth sending to the friend who is mid-rinse at the sink: scrape off the big stuff, skip the tap, and let the machine read the load. That is the advice from ENERGY STAR and the makers, in their own words.

Want to skip ahead? If you are switching to a no-rinse routine and want a plastic-free, enzyme-based tablet to go with it, the one we like is Blueland Dishwasher Tablets Free & Clear. Its CleenBeez product page shows it as fragrance-free and PVA-free, and lists protease and amylase enzymes in the ingredients. The Buy Now link is on that page.

What the makers actually say

  • ENERGY STAR: "Rinsing dishes before loading them in the dishwasher increases the total water and energy used." It says certified dishwashers and today's detergents "are designed to do the cleaning so you don't have to."
  • Bosch: "No need to pre-rinse dishes before loading. Just make sure the food is scraped off the dishware. Detergent needs small food debris to cling to in order to work properly."
  • Cascade: its enzymes "actually work BETTER if you don't pre-wash your dishes, because without food to attack, their cleaning power is underutilized." That page is about Cascade Platinum Plus, so it speaks for Cascade's formula, not every detergent.
  • Whirlpool: "It is not necessary to wash or even rinse your dishes before putting them in the dishwasher," and pre-rinsing "may not be as helpful as it seems."

Four sources, one message. Nobody on that list asks you to rinse first.

Why enzymes want a little food

Many modern dishwasher detergents lean on enzymes. A Blueland safety data sheet for its Automatic Dishwasher Tablets lists a protease blend at 1 to 10 percent and an amylase blend at 0.1 to 5 percent by weight. Blueland says its enzymes target things like proteins and starches, and that they "need something to bind to and break down." Bosch and Cascade make the same point: a little leftover food gives the detergent something to work on.

To be clear about what this is: it is what the makers say about their own products. It is not independent test data.

What soil sensors do

Bosch's use and care manual (model SHX78DC5N) says its AquaSensor "is an optical measuring device (light barrier) which measures the turbidity of the washing water," and that "in the Auto cycles the temperature and run time are additionally adjusted to the level of soiling." ENERGY STAR describes the same idea: a soil sensor can "detect if the water coming off the dishes is dirty or clean, which can save water and help ensure the dishes come out clean."

A shorter cycle for a lightly soiled load is the design working as intended. The risk Whirlpool describes is narrower: on some newer machines, dishes rinsed too thoroughly may make the sensors "register the load as cleaner than it actually is, resulting in a shorter or less effective cleaning cycle." Note the "may" and the "some newer." That is a caution, not a measured result. Bosch's manual says the same in its troubleshooting table: if dishware "has been precleaned too intensively," then "the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed."

What we could not confirm

  • How much less clean, measured. Makers say pre-rinsing is unnecessary and can reduce cleaning performance. We found no test data showing how much cleaner or less clean pre-rinsed dishes come out. The thread's version is a claim, not a test result.
  • Lower water temperature. Bosch says its Auto cycle adjusts temperature and time to the soil level. It does not say by how much for a pre-rinsed load.
  • Hard water. We found no maker guidance saying pre-rinsing helps. Whirlpool says rinse aid can help minimize hard water mineral deposits.

When a rinse cycle still makes sense

  • Dishes will sit overnight. ENERGY STAR: "If your dirty dishes sit overnight, use your dishwasher's rinse feature. It uses a fraction of the water needed to hand rinse." Whirlpool says some models have a Rinse Only or Rinse and Hold cycle, run without detergent, every 24 hours until the load is full.
  • Big scraps. Scrape off bones, seeds and big pieces of food. Blueland's guide says these can clog a filter or spray arm.
  • Baked-on or dried-on food. Bosch's manual points to its Heavy cycle for stubborn, burned or dried-on food.
  • Dishes still come out dull or dirty. Bosch's checklist covers the filter, the loading, rinse aid and the spray arms, before going back to the sink.

A no-rinse routine

  1. Scrape food into the trash or compost.
  2. Load with space between items and nothing blocking the spray arms.
  3. Pick the cycle for the load: Auto for everyday mixed loads, Heavy for baked-on pots (Bosch).
  4. Add rinse aid if your machine uses it, and clean the filter regularly (Bosch).

The tablet we like: Blueland Dishwasher Tablets Free & Clear

View Blueland Dishwasher Tablets Free & Clear on CleenBeez

It fits the routine above, and the reason is on the label. The CleenBeez product page lists an ingredient panel that starts with Sodium Citrate, Sodium Carbonate and Sodium Percarbonate and includes a Protease Enzyme Blend and an Amylase Enzyme Blend, the enzymes that the makers above say want a little food to work on. If you are scent-sensitive or trying to cut plastic, the same page shows it as fragrance-free, dye-free, PVA-free, chlorine-free and ammonia-free, and it carries EPA Safer Choice, EWG Verified and Cradle to Cradle marks. See the product page for the full ingredient list.

The honest part: Cascade's enzyme statement is about Cascade's own product, so it is not proof for Blueland. Blueland makes the same no-rinse argument for its own tablets, which is a brand statement, not a test. We have not tested it. As our tablet guide notes, results vary with your machine and your water.

See Blueland Dishwasher Tablets Free & Clear (Buy Now link on the product page)

Bottom line (the screenshot version)

  1. Makers agree: scrape, don't rinse. ENERGY STAR says rinsing adds water and energy use.
  2. Bosch and Cascade say detergent works better with a little food to act on.
  3. The thread says rinsing is the reason dishes come out less clean. We found no test data measuring that.
  4. Dishes sitting overnight? Use the dishwasher's rinse feature.
  5. Want an enzyme-based, plastic-free tablet? Start with Blueland Dishwasher Tablets Free & Clear.

Related reading: Is Dish Soap Residue on Your Plates a Real Concern?

Sources

Sign in to vote on this article

Looking for more healthy living tips?